Trial Offers
Product Spotlight
IEN / DECEMBER '16
11
www.ien.com
Test & Measurement
Automatic Wire Crimp Tester
The ACT-220 from IMADA (Northbrook, IL) features easy-to-use menus to select units, test speed, destructive or non de-
structive testing and hold duration that simplify crimp test programming. The EL electro luminescent display is easily seen in
dark or bright locations, and the unit saves up to 26 individual wire crimp test profiles in memory. The wire terminal grip has
12 slots which accommodate wire diameters from 1~8mm. Features include:
• Destructive and nondestructive test modes.
• Force hold duration up to 999 seconds in 1 second increments.
• Color-coded LED indicators for Go/No Go testing.
• Selectable digital speeds 10/25/50/100 mm/min.
• Saves up to 26 test configurations in memory.
• EL electro luminescent display, highly visible in the dark or bright sunlight.
• Time and date stamp.
• Selectable units: lbf, kgf and N.
• 1,500 data memory for recall or download (RS-232C output).
• Kit includes terminal grip, wire cam grip, ACT Logger data acquisition software, USB cable and calibration cert trace-
able to NIST.
www.imada.com; 847-562-0834
Indicator Gage Offers More
Measurement Capability
Long a shop floor
standard for pre-
cision ID and OD
measurements, the
Multimar 36 B In-
dicator Gage from
Mahr Federal (Prov-
idence, RI) has been
enhanced to accept
a wider range of
contacts and anvils,
enabling measure-
ment of pitch, gear
diameters, threads,
taper diameters and
recesses, and more.
It can also accept a
Mahr Integrated Wireless Indicator for wireless data trans-
mission. Handy and economical, the Multimar 36 B is avail-
able in both T-Plate and V-Plate styles and in two sizes. The
36 B ID/OD Indicator Gage can measure inside diameters
from 0.75" to 9" and outside diameters from 0.25" to 9.5",
and can accept any indicator with an 8 mm mounting shank.
Other features include:
• An improved design for accepting many of the con-
tacts and anvils from our Multimar 844 T universal
gage, making the 36 B even more versatile than ever
before.
• By combining the gage with a Mahr Indicator with
Integrated Wireless, users can transmit measurement
results wirelessly to their data collection system.
• A T-Plate configuration on the 36 B that gives a
diameter reading directly across the diameter (a third
contact may be used as a side-stop or centralizer),
while the V-Plate configuration is self-centralizing.
• Adjustable contact retraction, which allows for the
measurement of grooves and races.
• Frictionless reed-spring motion transfer, which facili-
tates repeatability, and gaging pressure is adjustable
from 0-35 N/0-8 lb.
www.mahr.com; 800-343-2050
SUBSCRIBE TO
AT WWW.IEN.COM/SUBSCRIBE